Johnels79, I think that you may we’ll find that driving with additional internal lights is a distraction. We have the Extra Ambience Lighting + Internal LED’s in the Roof Lights which are great when stationary but too bright for driving IMHO.
Surprisingly there does not appear to be a Highway Code Law on Internal Lighting during Driving. Here are a couple of attachments for you - Hope this is of help to you Dave
Lighting requirements (113 to 116) - THE HIGHWAY CODE : https://www.highwaycodeuk.co.uk/lightin ... ments.html
This is a view with the Ambience / LED Map (naturally not normally ON) / Roof Lights ON just as an example :
Ambient light and footwell
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
-
- Posts: 46
- Joined: Sat Aug 15, 2020 7:56 pm
- Location: Cheshire
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Hi White_wolf. From your pictures and wording, you bypassed using the controller for the puddle lights, but did you put both separate puddle light cables into the two positap fittings or are there separate cables with the two cables linking to those ? I can see it's been few months since your post, hopefully you remember.
2020 Qashqai 1.3DIG-T 160 DCT N-Tec in Pearlescent Storm White
-
- Posts: 46
- Joined: Sat Aug 15, 2020 7:56 pm
- Location: Cheshire
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Update on my comment above.
Fitting the puddle lights after fitting the footwell lights is a doddle, as far as the electrics go. Just use the positap tap connectors on each individual footwell light cable on the relevant side. Red to red and black to white.
Fitting the puddle lights after fitting the footwell lights is a doddle, as far as the electrics go. Just use the positap tap connectors on each individual footwell light cable on the relevant side. Red to red and black to white.
2020 Qashqai 1.3DIG-T 160 DCT N-Tec in Pearlescent Storm White
-
- Posts: 54
- Joined: Mon Oct 14, 2019 10:16 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Hi Alan,Alan W wrote: ↑Sun Aug 16, 2020 7:45 pm Hi White_wolf. From your pictures and wording, you bypassed using the controller for the puddle lights, but did you put both separate puddle light cables into the two positap fittings or are there separate cables with the two cables linking to those ? I can see it's been few months since your post, hopefully you remember.
The puddle lights come with a length of wiring and I used these wires and positaps into the + & - to the footwell led itself. I did this on both sides of the car.
The puddle lights wire I ran inside the bottom of the wing, then the wire up and into the car via a small hole in the door jamb.
Then inside footwell cover off and away you go.
Hope that helps, apologies it's been a while - I never got an email notification about any replies.
Mick.
-
- Posts: 46
- Joined: Sat Aug 15, 2020 7:56 pm
- Location: Cheshire
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Thanks Mick. All sorted now and looking sweet. Once I got the footwell lights in, it became a simpler choice to use the left and right side led light cables rather than add yet more wires and positap into the main wiring, so I'm thankful for your posts previously.White_wolf wrote: ↑Thu Sep 03, 2020 10:11 pmHi Alan,Alan W wrote: ↑Sun Aug 16, 2020 7:45 pm Hi White_wolf. From your pictures and wording, you bypassed using the controller for the puddle lights, but did you put both separate puddle light cables into the two positap fittings or are there separate cables with the two cables linking to those ? I can see it's been few months since your post, hopefully you remember.
The puddle lights come with a length of wiring and I used these wires and positaps into the + & - to the footwell led itself. I did this on both sides of the car.
The puddle lights wire I ran inside the bottom of the wing, then the wire up and into the car via a small hole in the door jamb.
Then inside footwell cover off and away you go.
Hope that helps, apologies it's been a while - I never got an email notification about any replies.
Mick.
Thanks, Alan
2020 Qashqai 1.3DIG-T 160 DCT N-Tec in Pearlescent Storm White
-
- Posts: 54
- Joined: Mon Oct 14, 2019 10:16 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Ahh brilliant.
You are very welcome!
Really does give the car a nice touch, doesn't it?
You are very welcome!
Really does give the car a nice touch, doesn't it?
-
- Posts: 46
- Joined: Sat Aug 15, 2020 7:56 pm
- Location: Cheshire
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
It really does. Now that the darker, wetter nights are drawing in, they are proving useful on dimmly lit car parks ...... as well as the looks of jealousy from onlookers with "posher" cars.White_wolf wrote: ↑Mon Oct 05, 2020 9:27 pm Ahh brilliant.
You are very welcome!
Really does give the car a nice touch, doesn't it?
2020 Qashqai 1.3DIG-T 160 DCT N-Tec in Pearlescent Storm White
-
- Posts: 8
- Joined: Fri Mar 13, 2020 3:56 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Help please from any one whose fitted this kit.
I have a 2018 DCI J11 but I can’t find the cars connector to plug the kit loom connector into, I’ve spent an hour trying to find it, I followed the images and read the comments but no luck, could someone who’s done this install before help with telling me the answers to the following which I hope then I can find the cars connector.
Is the cars connector already plugged into something ? What colour connector am I looking for ? When it’s found will I still have one of the two kit loom connectors not fitted ? If so which male / female connector is not used. Nothing the size should help in identification.
Any help or comments will be greatfully received.
Thank you
Chris
I have a 2018 DCI J11 but I can’t find the cars connector to plug the kit loom connector into, I’ve spent an hour trying to find it, I followed the images and read the comments but no luck, could someone who’s done this install before help with telling me the answers to the following which I hope then I can find the cars connector.
Is the cars connector already plugged into something ? What colour connector am I looking for ? When it’s found will I still have one of the two kit loom connectors not fitted ? If so which male / female connector is not used. Nothing the size should help in identification.
Any help or comments will be greatfully received.
Thank you
Chris
The connector your looking for is behind the footwell trim taped up. I'm sure when i fitted mine last year it did show a pic on the instructions. 1st page of this thread shows the pic with side trim removed so you can see the connector.