Glow plug fault

[Blueovalbug]

So I was getting the red eml light a cheap scan tool came up with glow plug fault what people opinions one the first 3 thanks jamie

[andy2019]

New set of plugs will sort the problem out

[Blueovalbug]

Hopefully not quite sure why 1is a shade of black and the other aren't

[Blueovalbug]

Guys I need you help so I'm still getting the engine management light come on now I know the ones that came out say 11 volts on them but I never checked the new ones I put in online I'm getting results saying 4.4 volts what's going on

[andy2019]

sounds like the ones you took out were the incorrect volts, as they should be 4.4v. is your qq a 1.5d engine

https://www.ebay.co.uk/itm/292639932779

cheaper brand if you dont want to spend £50 on a set..

https://www.ebay.co.uk/itm/152562841534

[Blueovalbug]

Yes 1.5 dci k9k pure tec

[andy2019]

ok grab yourself a new set of plugs and let us know how you get on

[Blueovalbug]

I spoke to some one at nissan this morning he couldn't tell me what volt they should be as the system didn't state it he did give me the part number tho which is
1106500QAF its getting hard work this ha ha

[andy2019]

The code they gave you is for nissan glo-plugs £15 each. The bosch set can be found here and they are 11v so thats gotta be right for your car
https://www.ebay.co.uk/itm/235115498498

[Blueovalbug]

This is the side of the box of the new ones I put in but didn't even think about what volts they were there made by AN PARTS iv eMailed them to try figure out which ones they are. The 4 that originally came out the car were 11 volt I tried all 4 on a car battery connected by jump leads not one of them glowed orange I was sure I'd crack it until the eml came on again last nite...