It is usual that the position where you locate a OEM scissor jack is different from where you put a trolley jack. The trolley jack would go on a flat surface normally. Not on a ridged part. Looks to me like you've jacked up the car in the wrong place for a trolley jack and caused the damage. When I watched my car being jacked up to have all season tyres fitted the fitter looked under the car each time and identified a suitable place to raise it with the trolley jack. The manual shows only the point to use an OEM jack not a trolley jack.
From the photo it doesn't look like rust but staining from the underbody protection.
Why were you jacking it up? Is something wrong with the car?
Nissan QQ J12 - Trolley jack
-
hootintootin
- Posts: 346
- Joined: Sat Nov 06, 2021 7:20 pm
- Location: UK
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
QQ Tekna AWD Xtronic ordered Aug 2021and arrived Dec 2021
>> think you had better take it back to your dealer and get them to look at it.
Thank you. I will look into it.
By the way, the scissor jack 99550ey20a may not be compatible with 2022, 2022 is not on the list:
Compatible Vehicles:
NISSAN QASHQAI 2006 TO 2010
NISSAN QASHQAI 2010 TO 2013
NISSAN QASHQAI 2014 TO 2017
NISSAN QASHQAI 2017 TO 2021
NISSAN QASHQAI PLUS 2 2008 TO 2010
NISSAN QASHQAI PLUS 2 2010 TO 2013
After going through the used ones listed on eBay, I have concluded that the scissor jack design varies from model to model.
Thank you. I will look into it.
By the way, the scissor jack 99550ey20a may not be compatible with 2022, 2022 is not on the list:
Compatible Vehicles:
NISSAN QASHQAI 2006 TO 2010
NISSAN QASHQAI 2010 TO 2013
NISSAN QASHQAI 2014 TO 2017
NISSAN QASHQAI 2017 TO 2021
NISSAN QASHQAI PLUS 2 2008 TO 2010
NISSAN QASHQAI PLUS 2 2010 TO 2013
After going through the used ones listed on eBay, I have concluded that the scissor jack design varies from model to model.
>> Why were you jacking it up? Is something wrong with the car?
The car is OK. I have a spare wheel (1/1). I need to practice the lifting process with the jack, in order to be ready if the tyre goes flat. I travel some remote places so I must be ready for it when it happens. Each vehicle has a different behaviour. Thank you once again for the information.
The car is OK. I have a spare wheel (1/1). I need to practice the lifting process with the jack, in order to be ready if the tyre goes flat. I travel some remote places so I must be ready for it when it happens. Each vehicle has a different behaviour. Thank you once again for the information.
