Front camera wiring photo needed 2013 360
Posted: Thu May 26, 2022 1:22 pm
2013 J10b 360 1.6 petrol bought as damaged repaired but the front camera doesn't work. The wires were just twisted together and taped.
The only photos I have seen so far are on ebay where there was one from a breakers with a bit of the loom on it.
The camera 284F1 BR00B has red, black, yellow, and white, the loom I saw had blue and black wires.
The wires used on my car are thin and nothing like those colours see photos.
I put a choc block on to try and work out the wiring but I get odd voltage readings of around 3v pulsing. No constant power.
It would be a great help if someone has the same and can tell me which wires go where or if this is totally wrong.
The only photos I have seen so far are on ebay where there was one from a breakers with a bit of the loom on it.
The camera 284F1 BR00B has red, black, yellow, and white, the loom I saw had blue and black wires.
The wires used on my car are thin and nothing like those colours see photos.
I put a choc block on to try and work out the wiring but I get odd voltage readings of around 3v pulsing. No constant power.
It would be a great help if someone has the same and can tell me which wires go where or if this is totally wrong.