How to change front door handle on Nissan Qashqai J10 – replacement guide

General Chat about the Mk1 QashQai
Post Reply
User avatar
QashqaiSilver
Posts: 275
Joined: Sun Jan 09, 2022 10:35 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by QashqaiSilver »

Very handy guide here. Worthy of note is that the torx screw holding the door handle is a T20 as they mention and not a T10 as in the official Nissan Qashqai workshop manual for the J10. Also this screw does not need to be screwed all the way out.

How to change front door handle on Nissan Qashqai J10 – replacement guide
https://club.autodoc.co.uk/pdf-manuals/ ... -guide.pdf
J10, 2008, 1.6 petrol, Acenta

nissanbel
Posts: 11
Joined: Thu Dec 01, 2022 8:33 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by nissanbel »

I screwed mine all the way out and it fell into the door, do you happen to know the dimensions for this bolt?
User avatar
QashqaiSilver
Posts: 275
Joined: Sun Jan 09, 2022 10:35 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by QashqaiSilver »

The dimensions are. It is a 7.8mm in the caliper. The pitch thread depth is 1.1mm. Total length of screw is 17.9mm

DSCF3950.JPG

DSCF3949.JPG

DSCF3948.JPG

J10, 2008, 1.6 petrol, Acenta
nissanbel
Posts: 11
Joined: Thu Dec 01, 2022 8:33 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by nissanbel »

oh God,

thanks so much.... i got mine out as well - but your illustration above is exactly what i was looking for.


thanks once more
Post Reply