IDPM issues

General Chat about the Mk1 QashQai
Post Reply
khelyd71
Posts: 4
Joined: Mon Nov 22, 2021 3:25 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by khelyd71 »

Hi guys,
Need so advice please.

I have just changed my IDPM module to cure a wiper issue.
While I now have wipers, the engine will not turn over, no click nothing.
Do I need to programme the IDPM and if so is it something I can do or do I have to take it to a dealer?
Or will swapping the electronics from one IDPM to another do the same job?
Cheers

User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

There is nothing explicit about configuring a replacement IPDM unit in Nissan diagnostics...unfortunately.

However, IPDM is responsible for much of the vehicles power distribution and protection. For the starter motor solenoid to operate the BCM unit must enable the Starter relay within IPDM itself...and that is enabled via the BCM unit and ignition key system.

Perhaps your newer IPDM unit has faults? Perhaps the IPDM has to be registered to the car...not sure about that as info not available.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
khelyd71
Posts: 4
Joined: Mon Nov 22, 2021 3:25 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by khelyd71 »

ok cheers
Post Reply