Page 1 of 1

Central Locking

Posted: Wed Sep 15, 2021 8:55 pm
by marmate55
I have a 2009 Qashqai j10 2.0 auto fitted with the inteli key.I am trying to fit a push button start with pke keyless entry.
Having connected the system all together almost everything works fine except the central locking. The car starts ok and it also remote starts as well. But i cannot lock the doors.
i have tried fitting the lock and unlock wires to the BCM module and also to the wires in the kick panel, using both positive and negative inputs with no success.
Using a spare key fob with no battery in to turn ign to acc to remove steering lock and also using for immobiliser function.
Does anyone have any thoughts as to why the central locking will not work.
Thanks for all your suggestions.

Re: Central Locking

Posted: Sun Sep 26, 2021 2:15 pm
by marmate55
Just an update, finally got it all sorted. Found both fuses had failed on the lock/unlock wires.
Replaced and now working 100%.
If anyone is interested to do this it is quiet straight forward. When i reserched doing this was told it wouldnt work with the intellikey system, but it works fine because you are not using the intellikey system it,s on the pke module and remote.
So what i have now got is a car that has a push button start, a remote start function,( Ideal for the winter icing, living in spain it,s for the aircon).
Doors that lock/unlock as i approach/walkaway. Super system if you need one it is an Easyguard system EC002. Probably got upgraded one now mines 2 years old. Heres the link :-https://www.aliexpress.com/item/3291977 ... 1722%22%7D. Good luck.