2012 Nissan Qashqai 1.6DCI Tekna

Forum for Engine, Exhaust, Drivetrain, ECU
Post Reply
lj2606
Posts: 13
Joined: Thu Jun 30, 2022 10:26 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by lj2606 »

Hi all, I have had issues with my Qashqai since I bought it private a few months back.

The stop start function didn't work and on inspection I realised it didn't have the correct battery fitted. I have since had a new stop start battery fitted but still no joy.

I had the codes read at Nissan and had a P0016 code which was a correlation issue between cam and crank sensor. I started with the cheaper items first and swapped both Cam and Crank sensors. Ended up being the timing was out so I have had a new timing chain kit fitted today and the P0016 error has gone. All that is left now is an air con pressure sensor error code. Would this error stop the stop start function working?

I will fit a new one tomorrow but am getting sick of throwing cash at the car now as I guess I will need a full re-gas aswell.

Thanks in advance.

andy2019
Posts: 1787
Joined: Sat Oct 26, 2019 8:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by andy2019 »

start stop has always hit and miss on most cars. don`t think it will come on while air-con is running. as you now have the correct batt fitted to it may need a good charge up 1st. start stop works when you take it out of gear and hand-brake on (will work with out hand-brake as long as your not stopping on a slope when parking)
lj2606
Posts: 13
Joined: Thu Jun 30, 2022 10:26 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by lj2606 »

Thanks Andy
I have the error message on the dash so there is a fault. Looks like it has to be the air con sensor. I have picked one up today so will fit later and see
Post Reply