Car has stopped

General Chat about the Mk1 QashQai
Post Reply
ajclayton
Posts: 6
Joined: Thu Jul 21, 2022 7:38 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by ajclayton »

I had these codes off the AA guy, I changed the camshaft sensor and the car wont start. Its a Qashqai 2.0 DCI diesel. I had lack of power and had to stop, when the car started it was lumpy. Now it wont start. My mechanic says its the timing chain out of line.

Engine control - 57Z / Diesel EDC 16CP33 Status :P0560 - System power supply. Error Message : Faulty. Error static. Status :P0340 - Camshaft position sensor. Error Message : Faulty. Error static. Status :P0670 - Glow duration control unit. Error Message : Open circuit/short circuit. Error static. Status :P0606 - Engine control unit. Error Message : Faulty. Error static. Status :P062B - Engine control unit. Error Message : Faulty. Error static. Status :P2A00 - O2 sensor (bank 1, sensor 1). Error Message : Signal outside specified range. Error static.P253F - Unknown fault. Error Message : Unknown error type (22). Status :P1525 - Cruise control. Error Message : MIL with cruise control active. Error sporadic.We have recovered your vehicle.Above codes in memory requires investigating Engine Oil Level Ok. Coolant Level Ok.

User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

Its difficult to determine from the errors (DTCs) whether they sign post the original fault or are reporting the state of the engine after the fault occurred. I think they do both so whats the important one? P0340 is a true DTC in diagnostics and truly relates to a camshaft sensor error. That seems to tie up with your mechanics timing chain suspicion.

I suspect you have an elderly engine so its a reasonable item to check properly first...timing chain
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
ajclayton
Posts: 6
Joined: Thu Jul 21, 2022 7:38 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by ajclayton »

Thanks for the reply. I changed the camshaft sensor, I`m going to change the timing belt. Should I change the crank sensor as well.
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

If you suspect a faulty sensor and can prove it...change it. Ensure timing after component change is set correctly of course.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
Post Reply