Just picked up a 2020 Nissan Qashqai 1.3dig-t liking the car so far just a few things want to see if common issues.
Clicking sound when pushing the clutch pedal down, on inspection looks like clutch pedal arm is hitting a metal bracket on footwell. Should there be a cover that has maybe been lost?
When closing car doors sounds very tinny if that makes sense is there something to do to reduce the sound when closing the door?
No major issues which is good but a few annoying ones which hopefully be an easy fix
Thanks in advance
Few minor things
- MikeGC
- Posts: 1852
- Joined: Tue Feb 07, 2017 11:50 am
- Location: Stockport
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
Welcome to the forum.
In my humble opinion the clutch pedal should not be making a noise of any type.
The doors - sadly that sounds familiar, no idea what you might be able to do
Good Luck
In my humble opinion the clutch pedal should not be making a noise of any type.
The doors - sadly that sounds familiar, no idea what you might be able to do
Good Luck
March '22 - J12 1.3DIG-T 160 CVT Tekna+ with all wheel drive - Pearl Black
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
-
- Posts: 2
- Joined: Fri Nov 17, 2023 6:11 am
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
From my experience, my clutch pedal was clicking, then the end of the connecting rod (to the master cylinder) snapped off! When this happened, the clutch pedal dropped to the floor and I could no longer change gear. Luckily, I managed to pull over into a relatively safe spot. It's not too difficult to change the clutch master cylinder, on my J10.
-
- Posts: 2
- Joined: Fri Nov 17, 2023 6:11 am
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
I found this YouTube video helpful for how to show the damage and how to remove the master clutch cylinder. I now recommend replacing the master cylinder with a quality replacement, after my fashioned repair piece failed, after a couple of months.