stop/start system fault

General Chat about the Mk1 QashQai
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

Eddiep wrote: Thu Jul 15, 2021 1:38 pm Thanks I think it is running D302. Should it be updated.
Souds like it? Search for D302 or Headunit reboot on this forum. Loads on the subject
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta

User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

NOTE - Firmware Update appears to be D605:

See this post page from jposborn84

viewtopic.php?p=85825#p85825
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
Eddiep
Posts: 4
Joined: Thu Jul 15, 2021 10:32 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Eddiep »

Thanks
Kallum
Posts: 2
Joined: Tue Aug 03, 2021 2:43 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Kallum »

Can anyone help my Engine management light is on Stop/start says malfunction failure When you put your foot down it sort of losses power around 3,000 revs and then picks back up a second or 2 later Since the engine management light as came on the speed limiter or cruise control isn’t working I’ve had it at the garage and they said it is the dpf I’ve took it on the motorway and they have forced re-gen but still the same
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

Welcome to this forum


Others - note similar topic posted at viewtopic.php?f=22&t=11228&p=86438#p86438
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
HandyAndy47
Posts: 1
Joined: Fri Sep 24, 2021 7:48 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by HandyAndy47 »

May be useful to someone :
I had a recurrent stop start fault on my 2013 techna +2. It only came on during long drives and would eventually go into a limp mode. However it was easily reset with a code reader. The fault Error Code P0380 is defined as Glow Plug/Heater Circuit “A” Malfunction. Skeptically I checked the glow plugs with a cheap electrical test meter which can easily be done in situ. Just pull off the leads and test between chassis and the end of the glow plug. Sure enough 1 of the 4 was a dead short. £13 later and its fixed. So far the stop start issue hasn't returned.
saltynuts101
Posts: 1
Joined: Tue Apr 26, 2022 8:19 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by saltynuts101 »

Kallum wrote: Tue Aug 03, 2021 2:46 pm Can anyone help my Engine management light is on Stop/start says malfunction failure When you put your foot down it sort of losses power around 3,000 revs and then picks back up a second or 2 later Since the engine management light as came on the speed limiter or cruise control isn’t working I’ve had it at the garage and they said it is the dpf I’ve took it on the motorway and they have forced re-gen but still the same
I'm having the exact same issue,removed the battery,tested it with a smart charger which gave faulty battery error,so bought a new battery and it's still the same :oops: :cry:
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

Reminder:

Suspension of the Stop/Start function is a consequence of the ECU not able to control the engine correctly. As such DTCs (error codes) need to be examined. Engine sensors will trigger the ECU if their input to the ECU falls out of operating range. Primarily sensors such as:

Fuelling
Exhaust
Battery
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
adekcz
Posts: 2
Joined: Mon Nov 14, 2022 9:50 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by adekcz »

Hi there.
I'm having also problem with it. When I drive longer distance, after at least 15-20min of driving, error comes up saying start/stop system failure. I have charged the battery overnight which thought it helps, but no...

On the short journey around town it is all ok, start/stop works perfectly.

It is tekna model 1.5dci 2015, I have recently dealt with exhaust sensor problem, solved by cleaning the tube, then had glow plug error and changed two plugs. All errors gone by start/stop still appears.

The battery hasn't been changed since new.

If it was battery problem, I would imagine that error should come up on the or just after starting the car?

Any ideas will help, because I'm starting loosing my patience.. Thanks a lot.
andy2019
Posts: 1787
Joined: Sat Oct 26, 2019 8:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by andy2019 »

adekcz wrote: Mon Nov 14, 2022 10:00 pm Hi there.
I'm having also problem with it. When I drive longer distance, after at least 15-20min of driving, error comes up saying start/stop system failure. I have charged the battery overnight which thought it helps, but no...

On the short journey around town it is all ok, start/stop works perfectly.

It is tekna model 1.5dci 2015, I have recently dealt with exhaust sensor problem, solved by cleaning the tube, then had glow plug error and changed two plugs. All errors gone by start/stop still appears.

The battery hasn't been changed since new.

If it was battery problem, I would imagine that error should come up on the or just after starting the car?

Any ideas will help, because I'm starting loosing my patience.. Thanks a lot.
have you had the battery check to see if it`s chargeing ok. and have you hooked up a code reader to clear any stored codes that may be there ?
Post Reply