Hi can any one help
Nissan qashqai 2011..1.5 dci
Here goes ..yesterday evening went shopping when I started car the starter seemed slower than usual ..came home no problem
Next morning the car would not crank over ..had battery checked ..all good ..altinator all good
When I try start the car , it doesn’t seem to take any power from the dash board lights as you would expect ,,if the starter was sticking ,,it does shut radio and heater blowers off when in crank position ..when I release the key they come back on
There is no clicking from starter motor on crank
Battery good ..alternator good .. it does bump off
Oh there is also power getting to starter motor in crank position
Any one had this before
Thank you all
J10 wont start or crank
- gloucester
- Posts: 5173
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Welcome to this forum.
I don't know but others who should be able to assist should be along shortly.
I don't know but others who should be able to assist should be along shortly.
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
- calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
...
You need to check that there are two 12v connections to the Starter Motor.
1. 12v for the starter solenoid control (will give the clicking noise if working)
2. 12v direct to the Battery to turn the Starter Motor itself.
There is also a 10A fuse in the starter control (solenoid ) line.
If the starter is clicking the control circuit would seem ok, So check the Battery connection/wiring to the Starter Motor. Maybe a problem with the Starter Motor itself?
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta
-
- Posts: 5
- Joined: Wed Dec 01, 2021 1:39 pm
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
I had this problem and it was a small 10a fuse causing it.
I was installing a new stereo and the reverse camera stopped working, I also noticed the car would not start some time later.
Turns out I had blown the fuse for the reverse lights that powers the camera, changed it, camera work and also the car now started
Its the fuse box under the bonnet marked F14 its a small 10a fuse, a bit fiddly to get out.
Cannot believe this caused a non start issue!!!
I was installing a new stereo and the reverse camera stopped working, I also noticed the car would not start some time later.
Turns out I had blown the fuse for the reverse lights that powers the camera, changed it, camera work and also the car now started
Its the fuse box under the bonnet marked F14 its a small 10a fuse, a bit fiddly to get out.
Cannot believe this caused a non start issue!!!