Refitting A-pillar trim panel on J10
-
- Posts: 6
- Joined: Tue Aug 08, 2017 1:30 pm
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
Anyone know how to get one of these back on properly (driver's side)? I can't get it seated flush - it's held in place but there's a 1cm wide gap between it and the windscreen. The panel itself and the retaining clips (which also hold some cabling) all appear undamaged. Is there a special technique to this? Cheers...
- QashqaiSilver
- Posts: 275
- Joined: Sun Jan 09, 2022 10:35 pm
- Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)
They should be pushed in, if it is not holding, you have to remove it and see if one of the clips are damaged.
J10, 2008, 1.6 petrol, Acenta