2.0dci not starting

General Chat about the Mk1 QashQai
Post Reply
natedawg8t6
Posts: 5
Joined: Wed Nov 04, 2020 5:10 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by natedawg8t6 »

Hi all. New here but got problems..

2009 Nissan Qashqai 2.0dci on 92500 miles, its got full main dealer service history. Ive had the car just over a year and been an amazing car. 2weeks ago the DPF light came on. Gave it a very good run but light still wouldnt clear. I got a mobile mech to come and do a Forced Regen with a SnapOn Tool. This cleared the light. Car has been hesitant since and got worse as the days went on. There was no power bottom end up untill about 3000rpm then power would kick in but still jerky. Struggled to pull off from standstill and lacked on acceleration. Thurs morning it struggled to start - it kicked but stopped immediately
It done this twice and started on 3rd attempt. Thurs after work, the car would not start. Again it bites but stops immediately and hasnt started since. Any help much appreciated as Im at my witts end now.

Sorry for the long winded post
2009 J10 Qashqai 2.0dci Tekna

User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

To avoid much guessing I suspect you need to get a DTC scan (error codes).
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
natedawg8t6
Posts: 5
Joined: Wed Nov 04, 2020 5:10 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by natedawg8t6 »

Had or scanned, no fault codes.
2009 J10 Qashqai 2.0dci Tekna
Post Reply