Nissan qashqai +2 rear brake caliper carriers

General Chat about the Mk1 QashQai
Post Reply
Valoun83
Posts: 4
Joined: Sun Aug 18, 2024 10:28 am
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Valoun83 »

I have a 2011 Nissan Qashqai +2, 1.6 petrol, and the brake caliper slider has broken off inside the caliper carrier.

I have sourced the slider pins with no issues but sourcing replacement caliper carriers are proving quite difficult. All the sites seem to only list X-Trail rear caliper carriers.

Does anyone know if these are a carryover part between models?

Thanks.

Valoun83
Posts: 4
Joined: Sun Aug 18, 2024 10:28 am
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Valoun83 »

Does anyone have any ideas on this?

From looking at multiple adverts online it even looks like the Juke and Pulsar have very similar rear brakes to the Qashqai too.

If anyone could confirm if the rear brakes were the same across the model line it would save me a headache as they seem readily available for the other models.
Valoun83
Posts: 4
Joined: Sun Aug 18, 2024 10:28 am
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Valoun83 »

Update.
I took the gamble and ordered one of the X-Trail caliper carriers.
From checking them side by side to the one I removed from my car. I can happily say they are the same part. Fitted it no problem at all.

I have attached an image for reference. They are not the one I brought but they all seem the same.

Screenshot_20240822_182823_eBay.jpg

Post Reply