Hi all,
I am in the process of hardwiring my dash cam in but unsure what permanent live to use - what are you all using?
Thanks.
Hardwire dashcam, what fuse???
- Happy Grumpz
- Posts: 22
- Joined: Wed Nov 09, 2022 4:11 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
I used the HUD for mine
2022 J12 1.3 DiG-T Xtronic Tekna+ - Blade Silver
- Happy Grumpz
- Posts: 22
- Joined: Wed Nov 09, 2022 4:11 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
I don’t think they’re wired behind
2022 J12 1.3 DiG-T Xtronic Tekna+ - Blade Silver
-
- Posts: 7
- Joined: Fri Jul 01, 2022 9:50 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
I can't remember which one I have used but it was one of the spare ones. It's easy to check if you get yourself a multimeter. Open your car, check voltage with ignition off- if 0 turn ignition on- if above 12 volts that's the one
-
- Posts: 13
- Joined: Sun Aug 13, 2023 3:20 pm
- Qashqai Model: Still looking for one....
Sorry no help, but what did you install, I still can't decide
-
- Posts: 43
- Joined: Thu Nov 26, 2015 10:21 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
Just did an install of RedTiger dash cam. For the switched supply I used the "POWER SOCKET" fuse. I got the permanent supply from the fuse marked "ELEC B" above (although it was marked differently on my diagram.
Current: '24 reg e-Power Tekna in Magnetic Blue
Previous: '65 reg 1.5 dCi n-Tech (currently being used by my daughter) /// '08 reg 2.0 dCi Tekna 4WD (sadly deceased)
Previous: '65 reg 1.5 dCi n-Tech (currently being used by my daughter) /// '08 reg 2.0 dCi Tekna 4WD (sadly deceased)