59 plate QASHQAI problems

Forum for Engine, Exhaust, Drivetrain, ECU
Post Reply
Nickwilber82
Posts: 2
Joined: Sun Jan 26, 2020 6:08 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Nickwilber82 »

Hi guys I’m totally new to this site but desperate for your help. So my QASHQAI 1.5 diesel has threw up a red engine management light with reduced power 3 times now. All 3 times I’ve been semi hard accelerating eg down a slip road it’s come up with a obd code of p0381 glow plug/ heater indicator circuit and a code p2263 turbo charger boost system performance. Can anyone please shed some light on this. The wife is losing confidence in driving it so am keen to get the problem sorted ASAP. Thanks in advance. Nick

User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

The common fault with the diesels is a blocked exhaust gas transfer pipe and resultant gas pressure sensing problem. Its a thin bent pipe at the rear of engine and fairly low down. Drivers side I think? That fault will throw ECU combustion control out and flag a number of errors.

I'm not saying that is the problem but we may see some responses here by those who have experienced it. Search this site...you may find stuff on it.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
Nickwilber82
Posts: 2
Joined: Sun Jan 26, 2020 6:08 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Nickwilber82 »

Brill thanks
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Nick, you could take a look at this old post you might pick up something - Dave 🙂

https://www.qashqaiforums.co.uk/viewtopic.php?f=29&t=4994
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
cgs
Posts: 1
Joined: Mon Jun 14, 2021 2:15 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by cgs »

Have the same codes coming up on my Qashqai. Did you manage to find out what the problem was?
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

Welcome to this forum.

As you can see we haven't heard from the original questioner again.
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
User avatar
MikeGC
Posts: 1852
Joined: Tue Feb 07, 2017 11:50 am
Location: Stockport
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by MikeGC »

cgs wrote: Mon Jun 14, 2021 2:22 pm Have the same codes coming up on my Qashqai. Did you manage to find out what the problem was?
.
You might be better sending a private message to the original poster, who I don’t think is a regular.
March '22 - J12 1.3DIG-T 160 CVT Tekna+ with all wheel drive - Pearl Black
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
lewisbryant
Posts: 336
Joined: Sat Feb 23, 2019 7:27 am
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by lewisbryant »

59 plate 2009 j10 1.5, p2263 indicates a boost pressure issue, there is a known issue with the j10 where the top pipe going over the top of the engine and down the back and goes onto the turbo outlet, this pipe leaks oil and the oil gets onto the vacuum capsule for the turbo actuater, eventually it gets inside the capsule and starts getting to work on the diaphram and eventually it tears and starts to leak vacuum.

To check you need to see if the turbo diaphram is covered in oil, if it isn't then its something else if it is then you need to get a vacuum tester like a mityvac and remove the hose to the capsule and try and pull a vacuum and it should hold it if it starts to leak it then its buggered and a new turbo and top pipe will be required
Post Reply