Well I love this car, it runs well and drives very well.. but when I leave the car standing for a while (4,5,6 hours), then start I get the non-autostart issue.. flashing yellow for traction and ABS. If I stop the car, lock it, unlock and start again, the issue goes away, however the stop/start still doesn't work.
Reported codes(there are a few):
U100001 - communication CAN circuit
C170400 - Left front low air pressure
U0121 - Multiplexed traction control connection
P0470 - Turbine upstream pressure senser
P1525 - Consistent multiplex signals for cc/SYL
P0135 - Proportional richness sensor heating circuit
P1503 - Air vent control
I've changed the battery, I've also cleaned the turbine sensor pipe, and currently running DPF additive.
I'd love to get this car in good order, as I plan to keep is long term when back in the country.
On another note, has anyone noticed a difference when riding with 17" or 19" wheels.. it's curently a very cushioned ride with 17" wheels, and thinking or upgrading providing the comfort isn't jeopadized.
My first post - Many error codes. Not sure where to go next
- gloucester
- Posts: 5196
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Welcome to this forum.
Hopefully calnorth will be along shortly on the technical front.
On the wheel front, yes, you'll notice a difference - maybe a change to 18" would be the happy medium?
Hopefully calnorth will be along shortly on the technical front.
On the wheel front, yes, you'll notice a difference - maybe a change to 18" would be the happy medium?
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
Thanks: gloucester - I thought the same thing on the 18" wheels, happy medium.. thought I'd check to see what other have experienced first.gloucester wrote: ↑Sun Dec 20, 2020 6:11 pm Welcome to this forum.
Hopefully calnorth will be along shortly on the technical front.
On the wheel front, yes, you'll notice a difference - maybe a change to 18" would be the happy medium?
On aother note, how do you feel on the steering? For me I find it loose.. can this be tightened does anyone know?
- gloucester
- Posts: 5196
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
I didn't find anything amiss with the steering feel. Mine did start squeaking and a bush was replaced under warranty, but the feel was unaffected.
You haven't given many details about what car you have and its age/ mileage etc. Recent MoT?
You haven't given many details about what car you have and its age/ mileage etc. Recent MoT?
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
- calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
No idea on this other than: U100001 - communication CAN circuit
Nissan describes U1001 CAN COMM CIRCUIT as:
"When ECM is not transmitting or receiving CAN communi-
cation signal other than OBD (emission-related diagnosis)
for 2 seconds or more".
This is a CONSULT Test response and which would assist faulty items (Control Modules) detection. Without CONSULT we are stuffed.
Nissan describes U1001 CAN COMM CIRCUIT as:
"When ECM is not transmitting or receiving CAN communi-
cation signal other than OBD (emission-related diagnosis)
for 2 seconds or more".
This is a CONSULT Test response and which would assist faulty items (Control Modules) detection. Without CONSULT we are stuffed.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta