j11 condenser protection in front bumper ?
- MikeGC
- Posts: 1852
- Joined: Tue Feb 07, 2017 11:50 am
- Location: Stockport
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
A few years ago I had a Juke and their were a few threads on this subject.
The fixes varied between plastic mesh stuffed in willy-nilly to folk who removed the bumper and fitted aluminium mesh. Loads of pictures.
Haven’t heard of any QQ owners doing this (as far as I can remember)
The fixes varied between plastic mesh stuffed in willy-nilly to folk who removed the bumper and fitted aluminium mesh. Loads of pictures.
Haven’t heard of any QQ owners doing this (as far as I can remember)
March '22 - J12 1.3DIG-T 160 CVT Tekna+ with all wheel drive - Pearl Black
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
- gloucester
- Posts: 5173
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
I fitted a grille to mine - should be illustrated on here somewhere - I'll go and have a look
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
- gloucester
- Posts: 5173
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Yes - here's the article I wrote - however that was before Photobucket went (expensive) subscription only and all my useful posts disappeared!
I'll go and find some photos in my computer:
viewtopic.php?f=31&t=1327&p=43976&hilit=grille#p43976
I'll go and find some photos in my computer:
viewtopic.php?f=31&t=1327&p=43976&hilit=grille#p43976
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
- gloucester
- Posts: 5173
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Here they are:
Firstly here's what it looks like before:
I was surprised when I looked how vulnerable the radiator appears to be:
I bought some plastic mesh on eBay - "Universal Honeycomb Black Plastic vent car tuning racing Grill Mesh 40x100 cm" - which turned out to be a 1200x400mm piece that they'd cut the end off but still included - presumably because it's cheaper sending a 1000mm long parcel! I'm sure I paid £16.95 delivered - it's gone up somewhat since I got mine several months ago [now years!]:
It has a pattern which, although different, coordinates well with the upper grille design - though once it's fitted you can hardly see it anyway:
I fitted it down through the top - looked to be easier than taking the undertray off - this is after removing the top plastic trim:
I carefully measured and found I needed 800x160mm:
I used a Goscut to cut it:
Here it is fitted - you can hardly see it!:
... and this shows how it's held in place, with plastic cable ties. I used six though might put another four in if I feel it's necessary:
There's enough left over to do another car!
Firstly here's what it looks like before:
I was surprised when I looked how vulnerable the radiator appears to be:
I bought some plastic mesh on eBay - "Universal Honeycomb Black Plastic vent car tuning racing Grill Mesh 40x100 cm" - which turned out to be a 1200x400mm piece that they'd cut the end off but still included - presumably because it's cheaper sending a 1000mm long parcel! I'm sure I paid £16.95 delivered - it's gone up somewhat since I got mine several months ago [now years!]:
It has a pattern which, although different, coordinates well with the upper grille design - though once it's fitted you can hardly see it anyway:
I fitted it down through the top - looked to be easier than taking the undertray off - this is after removing the top plastic trim:
I carefully measured and found I needed 800x160mm:
I used a Goscut to cut it:
Here it is fitted - you can hardly see it!:
... and this shows how it's held in place, with plastic cable ties. I used six though might put another four in if I feel it's necessary:
There's enough left over to do another car!
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
- gloucester
- Posts: 5173
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
I used some of the leftover mesh on my bike!
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
I started to do exactly as Gloucester has mentioned with Metal Mesh (behind the Grill) made all of the Cardboard Cutouts but did just not follow it up. With the Juke I used Grills from the US which worked OK and were easy to fit. The other problem was I have the Chrome Strips & Skid Plate on the front of the QQ and if you buy what I have shown below you hide them. We had a new Condenser Installed way way back and have never had stone damage which I suppose is a Plus - Dave
These are from AliExpress & Zunsports if they still do them :
These are from AliExpress & Zunsports if they still do them :
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Biccus1, it looks like these parts are still available. The Car Grills are the ones I used on our Juke (see pic) and they have a range of stuff but are US based - Dave
https://www.customcargrills.com/Custom- ... Grills.asp
https://www.customcargrills.com/Custom- ... Grills.asp
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
- Red Rooster
- Posts: 103
- Joined: Thu Aug 25, 2016 10:05 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
Bringing this thread back to life a bit. I bought some mesh from Amazon and I thought the mesh size was a bit on the large side 25mm x 14mm? What do members think?
www.amazon.co.uk/BALLSHOP-Universal-Pla ... B01M035FL1
www.amazon.co.uk/BALLSHOP-Universal-Pla ... B01M035FL1
58 plate 2.0 l petrol Acenta
2016 1.6 DIG-T Ink Blue
2019 1.3 DiG-T 160 Tekna, Ink Blue
2024 1.3 DIG-T 160 MHEV Tekna with bose and led fog lights.Mag blue Black roof.
2016 1.6 DIG-T Ink Blue
2019 1.3 DiG-T 160 Tekna, Ink Blue
2024 1.3 DIG-T 160 MHEV Tekna with bose and led fog lights.Mag blue Black roof.