Identify missing door trim edge please?

Bodywork & Interior problems
Post Reply
User avatar
kennyken1988
Posts: 18
Joined: Fri Mar 03, 2023 11:07 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by kennyken1988 »

Our Qashqai came with a trim edge missing (see photos) which makes the metal edge exposed and extremely sharp.

I'm struggling to know what the part is called and or any code for it. If anyone can ID it that would be very helpful. Thank you.

IMG_20240406_122228.jpg

IMG_20240406_122330.jpg

andy2019
Posts: 2284
Joined: Sat Oct 26, 2019 8:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by andy2019 »

Scrap yard is the best bet. Dont think you end will be able to get just the end piece alone.
User avatar
kennyken1988
Posts: 18
Joined: Fri Mar 03, 2023 11:07 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by kennyken1988 »

Times passed and I had no luck from any scrap dealer online regarding this trim part.

Annoyingly my wife's just cut her finger quite badly so I'm seriously on the hunt again...

I've had a breakthrough though if it helps anyone else the part is know as: Moulding Door Sash Rear 822824EA1C

It appears the only way to get the plastic is by replacing the complete chrome strip. If this is the case then fine as it's extremely dangerous when the metal is exposed.

So I've found one....

https://shop.nissan.co.uk/products/niss ... ikLPnqPFg1

Also I will contact this seller:

https://www.ebay.co.uk/itm/Nissan-Qashq ... 635-2958-0

I've ordered the eBay one, managed to get it for £31.99.

I will post up how things go with removal and replacement to help others.
andy2019
Posts: 2284
Joined: Sat Oct 26, 2019 8:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by andy2019 »

Dont bother replaceing the whole lot just pull the plastic end cap off new one and fit push it onto your current trim.
Post Reply