Hardwiring dashcam in Qashqai 2018

ICE, Equipment, Options
SumOfAllEvils
Posts: 18
Joined: Mon Jan 31, 2022 2:47 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by SumOfAllEvils »

Thanks guys. I managed to do it. The only problem is the interference I'm getting while listening to some radio stations. But that's the fault of adapter I used for dashcam. Any idea if wrapping it in aluminium (not too tight of course) foil will fix it?

SumOfAllEvils
Posts: 18
Joined: Mon Jan 31, 2022 2:47 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by SumOfAllEvils »

Squashy2 wrote: Mon May 09, 2022 5:39 pm OP, can I ask which socket are you using that is a constant live?
Both the front one next to the E-brake, the one in the armrest cubby and all the USB's shut off after around 5 minutes on my J11B.
I was using the front lighter socket. I just noticed that it was still on after about a minute from switching off the engine. I want dashcam to go off straight after the engine is off so hardwired it.
Roly
Posts: 2
Joined: Fri Jan 20, 2023 2:35 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Roly »

Which fuse is constant live as my dash cam can record when parked, onboard electronics preventing battery total discharge.
Roly
Posts: 2
Joined: Fri Jan 20, 2023 2:35 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Roly »

Need to know which fuse is a constant live, as my dash cam registers the state of the battery to prevent discharge, as dash am has parking mode.
Post Reply