Page 1 of 1

Unknown Wire

Posted: Sat Sep 25, 2021 10:20 pm
by Newbie123
Good day all. I have recently purchased a CAT N (front bumper and side wing damage) Qasqai as a project. Im struggling to identify the purpose of 3 wires which looks like the connector was ripped off. Can anyone assist me please?

Its part of the wiring loom that connects into the Radiator Airflow Regulator which is already connected (see pic attached).

I have a 2014 1.5 Vision model.

It came with no front bumper, so I dont know how many front parking sensors it should have (still sourcing the loom).

IMG_20210925_145935.jpg



Any assistance will be greatly appreciated.

Re: Unknown Wire

Posted: Sun Sep 26, 2021 3:14 pm
by gloucester
Welcome to this forum

You say "I have a 2014 1.5 Vision model." but that's not a valid grade description.

In early to mid 2014 grades were Visia, Acenta, Acenta Premium and Tekna.

Then in late 2014 the range became Visia, Acenta, n-Tec, n-Tec+ and Tekna.

Only the Tekna would have the sensors on the ends of the bumper - for the Parking Assist functionality - making six in total. Other grades, when fitted with parking sensors, would have four.

Re: Unknown Wire

Posted: Mon Sep 27, 2021 11:05 am
by Qashowner
Isn't the outside temperature sender in the front bumper? Don't seem to be too many wires in that part of the loom.

Re: Unknown Wire

Posted: Tue Sep 28, 2021 6:20 pm
by Newbie123
@ Gloucester, Thank you, you are right, I have the Nissan Qashqai Acenta Smart VIS (it comes up as when I search my VRN).

Thank you @Qashowner, I'll search for the Ambient Temp sensor wiring diagram and replacement parts to confirm.

Appreciate the help.