Wire into cabin
I'm planning to install a Defa blockheater and a Defa heater in the cabin. Have anyone done this before? I'm wondering where in the firewall I should run the wire through - drill a new hole or use existing hole- the wire is about 1,5cm in diameter. Model J11
- gloucester
- Posts: 5173
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Welcome to this forum.
Something totally new to us!
Something totally new to us!
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Andei, welcome to the QQ Forum ! Where are you based ? It would appear somewhere Cold.
I have also never heard of this DEFA Blockheater, but I am assuming it is an Engine Warmer for the Winter much like the Webasto / Eberspaecher Systems - Dave
Just looking at the example a Big Hole is needed which you might not find.
Engine heaters • Solutions designed for every car • DEFA : https://www.defa.com/electrical-preheat ... e-heaters/
Example :
I have also never heard of this DEFA Blockheater, but I am assuming it is an Engine Warmer for the Winter much like the Webasto / Eberspaecher Systems - Dave
Just looking at the example a Big Hole is needed which you might not find.
Engine heaters • Solutions designed for every car • DEFA : https://www.defa.com/electrical-preheat ... e-heaters/
Example :
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
I live in Norway and winter can be really cold. It's not unusal with tempratures below - 20. I understand that most of the users on this forum are not familiar with this thing. My question is therefore the possibility of getting a 1,5cm thick cabel through the existing hole which is located behind the air filter.
Personally , and working for an OEM manufacturer , I would not drill any holes in a structural part of the car.
If there is an existing blanked off hole , I would recommend using this as strength considerations have already been taken into account.
Maybe this is a bit too careful , but safety is number 1
If there is an existing blanked off hole , I would recommend using this as strength considerations have already been taken into account.
Maybe this is a bit too careful , but safety is number 1
-
- Posts: 95
- Joined: Fri Jul 26, 2019 5:21 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
This video may help let you see how big the existing hole is and if this can be used or not.
Qashqai J11 2017 1.5 dci N-Connecta - Upgraded Horn - Upgraded Boot Lights - Bonnet Gas Struts - Hard Wired Dash Cam (Front/Rear) Dynamic Turn Indicators (Front/Mirror), Twin Exhaust Muffler, LED Interior, Reverse, Glove Box, Footwell, Puddle Lights.