New used QQ

Post pictures of your QashQai here!
Post Reply
Laki
Posts: 15
Joined: Tue Sep 19, 2017 8:50 am
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Laki »

Started to do some mods on my 2009 QQ j10. Shark fin antena, started to black out all chrome parts with plastidip. In future black alu rims, some cheap android car radio (nothing special) with reverse camera for the wifey. Maybe some red on break calipers... Amblems are in state of finish. Need to remove plastidip from betwen the letters. If anybody wants to use plastidip feel feee to do so. Just spray many layers and do it thick. If you do not like it just pill it. It is very easy. Letters A and I are completly black it is only some reflection.

20171001_123725.jpg

20171002_085750.jpg

20171002_085622.jpg

Nissan Qashqai j10 (2009) 1.6 petrol

Laki
Posts: 15
Joined: Tue Sep 19, 2017 8:50 am
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Laki »

Plastidip done. All chrome pieces blacked out. Cleaned back sign/badge and QASHQAI letters. Allmost satisfied. 😁 Waiting for android radio and reverse camera. Thinking about disassemble headlights and installing led strips as daylight.

Nissan Znak -1182x665.jpg

Nissan Qashqai j10 (2009) 1.6 petrol
Laki
Posts: 15
Joined: Tue Sep 19, 2017 8:50 am
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Laki »

I came short for rear amblems. Qashqai and nissan on the back doors finished. Look beyond the dirt.

Qashqai finis.jpg

Nissan nazad.jpg

Nissan Qashqai j10 (2009) 1.6 petrol
Terry64
Posts: 214
Joined: Sun Mar 04, 2018 3:38 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Terry64 »

Looks like you have given your car a few scratches getting the plasticoat from inbetween the letters.
I would of removed them completely, maybe even purchased a new qashqai badge and then sprayed and applied to the car.
Trying to get all that excess off must of been a pain staking job
Qashqai ACENTA 1.5 DIESEL , INK BLUE, Chrome Mirror caps,Tailgate Lower/Upper Trim,Front Lip Door side Strips Front lower grill, Bonnet struts,Puddle light + Footwell lights
Laki
Posts: 15
Joined: Tue Sep 19, 2017 8:50 am
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Laki »

Unfortunately you sir are right. Not quality olasti dip enough with first time user equals scratches. I made them with a toothpick. When i started to peel plasti dip it tear into small pieces because there was not enough layes.
Nissan Qashqai j10 (2009) 1.6 petrol
Laki
Posts: 15
Joined: Tue Sep 19, 2017 8:50 am
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Laki »

Added some DRL lights. Very satisfy for 10$.

20200429_174128.jpg

20200523_154348.jpg

20200523_154340_1.gif

Nissan Qashqai j10 (2009) 1.6 petrol
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Laki, just a simple question are these DRL’s (Std & Modified) allowed by the State in Serbia, as this is a modification to the Std Manufactured Nissan System - just interested Dave 🤨
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Laki
Posts: 15
Joined: Tue Sep 19, 2017 8:50 am
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Laki »

You asked right question I dont know. I'm gona found out in december when i am going to need a new registration. If it is problem, gona ducktape it with a black tape and try to oass that way. But till then i think it's not gona be a problem.
Nissan Qashqai j10 (2009) 1.6 petrol
Post Reply