Page 1 of 1

Towbar relay live feed "Help"

Posted: Sat Sep 11, 2021 9:26 am
by Davdon
Hi all

and thanks in advance for any help offered
I am about to put a towbar with electrics (7pin) on my 2012 1.5diesel quashquai

I will be using a TEB7AS relay which requires a constant live feed

Am I correct in assuming that there is no constant live anywhere near the back of the vehicle and that the only way
to do this is to run a new cable from the battery through the firewall inside the car somewhere back to the relay

any advice
cheers
David

Re: Towbar relay live feed "Help"

Posted: Sat Sep 11, 2021 2:18 pm
by calnorth
I think you'll have to feed one thru along with the indicator feed. Unless there's a power socket in the boot?

Re: Towbar relay live feed "Help"

Posted: Sat Sep 11, 2021 6:28 pm
by gloucester
Welcome to this forum

Check out some of the other posts - a similar issue may have arisen in the past.

I don't know of a wiring diagram being available but this might help:

https://nissan-europe.epc-data.com/qash ... rical/240/

Re: Towbar relay live feed "Help"

Posted: Sun Sep 12, 2021 8:05 am
by Fujikun

I think on the passenger side of the boot there's already a live feed. There's a part 2 of this video link is only for part 1

Re: Towbar relay live feed "Help"

Posted: Sun Sep 12, 2021 11:14 am
by gloucester

Re: Towbar relay live feed "Help"

Posted: Mon Sep 13, 2021 8:45 am
by Davdon
Thanks for the help and effort - lads
ill have a look through those vids today