Specifically states in the workshop manual after tire rotation to carry out sensor ID register. It does not re locate sensors automatically. If it did then there would be no point in setting their positions when carrying out a tpms sensor coding procedure! When coding sensors in you have to set all ...

No way of changing regulator on pump. If you have a scan tool that can read data then there should be around 6 live data readings for exhaust camshaft position, check the readings for these they should be around 6 to 10 degrees. If its around 20 degrees then it needs a new chain set. The pump is dri...

When it broke down was it still running? Not sure if the person/garage know this but the 1.5 k9k engine cylinder numbering is back to front so number 1 is gearbox end and timing belt end is number 4, with the cover on you can see injector 4 and and just about injector 3 . I would check if they chang...

Are you using the same garage? Some technicians are unaware that the injector numbers are back to front on these so number 1 is gearbox end and number 4 timing belt end so can end up confusing the matter by changing the wrong ones. Also these are piezo controlled injectors so do have a higher failur...

Passenger side footwell you need to be in to change it

The keys probably knackered mate, sounds like it is sending the lock signal randomly that could mean an issue with the button sticking or a short on the keys motherboard, would be a good idea to get a new key. Also not sure if your aware when you manually open the door if you present the keys nissan...

P0090 is more likely a symptom of a jumped/stretched timing chain on the 1.2 dig t, always recommend a cam crank oscilloscope trace and compare with a known good or removal of timing cover to check, by the time you get the cam cover off you can usually see a slack timing chain which confirms an issu...

I would recommend to check the sound system type is correct in configuration so base system for the standard sound system and bose if you have the bose system- this should be done by nissan

Nothing on their site as its customer complaint only technicians and some dealer staff should know about it, if you complain and the vehicle was built before January 2023 and it on the old software then the update will lessen the noise. The update involves reprogramming ecm and vcm.

There has been an update released to be performed on customer complaint basis to help reduce this for vehicles built before january 2023, I'd suggest getting intouch with dealers