Many thanks Andy!! Rubber ended one goes on the bottom according to that!! Surprising. Thanks again helped a lot. Changing them as soon as it stops raining!! £10 for 4 pins on eBay, £40 from local supplier! Probably £400 from Nissan :) Cheers Matt <a class="vglnk" href="https://m.yout...

Hi All On replacing my rear pads last week noticed the slider pins were corroded and sticking. Took them out cleaned up and refitted but had some issues with pads binding so ordered new slider pins. My question is does anyone know where the pin with the rubber tip goes? Top or bottom? I mixed them u...

Funkyanimal wrote: ↑Tue Nov 08, 2022 5:08 pm Did you ever fix this issue

As my post before, the daily never came back! Suspect bad battery contact? No idea

Just another update should people have this issue and found this via search. I used the car to go to Gatwick for a weeks business trip, disconnected the battery and reconnected on my return 7 days later. All problems have gone and over 1500 miles done since. No issues. Strange but hopefully won’t se...

Any suggestions anyone??

The Tail Light system is rather complicated. It is switched ON/OFF through the CAN Bus system, so not a straight forward/simple switching system as we might expect. Its computer controlled (CPU) and for some reason the Tail Lights are being incorrectly commanded by this CPU. Fault could be a bad sw...

Neither of those two DTCs come up in Nissan Diagnostics for your car. In fact all Brake Control DTCs are C11xx codes. Brake Light Sw simply feeds from the Battery (via foot brake) to 3 rear stop lamps...not complicated. It does however signal the Body Control Module for some reason? Its a bit of my...

Hi All, Just posting for information if anyone encounters a similar problem. My wifes 2011 J10 rear lights stayed on(LED's and only dim) when leaving the car, no matter what the lights were set to. Red Engine management light came on and only way to get them off was to disconnect the battery. Car dr...

OK, I've cleared the code and immediately light came back on. Read with a snap-on diagnostic and now getting P0544 and P01525(original P0545 was with a much cheaper reader). Car is running smoothly but im sure theres a burning smell as if DPF regen it on constantly. I dont want to burn the DPF as th...

Hi All I have a red engine light and code p0545 coming up on the reader. Looking at these forums and searching youtube, looks an easy fix by cleaning out the hose to the sensor. The problem I have is the hose in the videos shown is not in the same location on my car? There is a similar looking plug ...