Wheel
-
- Posts: 300
- Joined: Sun Feb 09, 2014 12:38 pm
None of them do.I'm trying to get prices from some places. a set of 4 costs about £500 , going up to £1300 with tyres.http://www.wheelbasealloys.com/alloy-wh ... er/19-inch
kramrolyat702014-03-31 05:25:44
kramrolyat702014-03-31 05:25:44
tekna cvt mag red
-
- Posts: 300
- Joined: Sun Feb 09, 2014 12:38 pm
Got a quote just now for wheel and tyre £294 delivered in UK.Waiting for confirmation they will fit then I'll post the email here.Re: original wheels and tyres, got quote from online dealer via nissan at £432.50 +vat plus £73+vat for jack.
tekna cvt mag red
-
- Posts: 300
- Joined: Sun Feb 09, 2014 12:38 pm
from wheelbasealloys.comoriginal wheels are as far as we are aware 7 x19 et 40closest match is 8X19 5/114.3 ET42 FOX FX004 (HYPER SILVER) 225/45WR19 NANKANG AS-1 96W XL£294 delivered UKthis is the upstep guide we have belowit lists 8.5x19 et30 to 40?so would think 8x19 et42 should be okCompared
to your existing wheel, this new wheel will have an inner rim which is
14.7mm closer to the suspension strut. The outer rim will poke out
10.7mm more than before.
tekna cvt mag red
-
- Posts: 300
- Joined: Sun Feb 09, 2014 12:38 pm
Wheelbasealloys can't guarantee these wheels will fit. They recommended I take the car to a specialist garage to try wheels to ensure fit is correct.Still searching.
tekna cvt mag red
hi guys, New to the forum, last night i managed to curb my 19inch tekna alloys yea was sort of my fault but not (long story) (I'm so pissed at this) anyway as I'm sure your aware diamond cuts can't be repaired that quick so I'm in need of a replacement one so wondered whether you ever got to the bottom of your research? on my existing one il replace the alloy and transfer over the tyre an send the damaged alloy away for repair. any help or advice would be greatly appreciated
kind regards
mike
mike
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Bomber, I think you will find that for a Std Alloy 19" to fit the Boot Area and use the available space is a problem. Can I suggest that if you have time then take a look under the Subject "Wheels & Tyres" - Full Size Spare or under "Non Technical Qashqai Discussion" - Spare Tyre / Gunk / Jack etc where you will find a vast amount of input from Members on the subject of Spare and Space Saver Wheels. Try also using the "Search" button for subjects it does help sometimes ! Hope you find what you want - Dave
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken