U1060 EHS/PKB

ICE, Equipment, Options
Post Reply
RS5
Posts: 2
Joined: Sun Jan 14, 2024 9:15 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by RS5 »

Have the following fault code as well as abs C1105 collision warning light on tpms light on.Have repaired wiring and fitted new sensor o/s/r.The car had new rear tyres but lights came on before this,so ruled out damaged sensor.Any ideas as to the cause.Just bought car.
Top

andy2019
Posts: 1887
Joined: Sat Oct 26, 2019 8:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by andy2019 »

was abs sensor wire damaged ? you`ll need to remove codes with code reader, have you checked your tyre pressures 33psi front, 30psi rear
Top
RS5
Posts: 2
Joined: Sun Jan 14, 2024 9:15 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by RS5 »

Soldered in new wiring and new connector with new abs sensor.Cleared all dtc's but this U1060 stays
Top
Aspire23
Posts: 11
Joined: Sat Dec 30, 2023 6:23 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Aspire23 »

U1060 hand brake parking control.
U1060 engine glow plug system fault.
May also be indication of ECU issue.
Top
Post Reply

Return to “Electronic systems”