Door handle removal

Bodywork & Interior problems
Post Reply
Atif
Posts: 71
Joined: Thu Nov 20, 2014 5:49 am

Post by Atif »

Hi,

Hope someone can help, how to remove rear door handle (outside). Outside temp is quite low (around -20C) and now driver side rear door will not close. I suspect that some ice may be somwhere near door handle.

If I park in warm garage, then after some time, I can close the door. So maybe ice melts then.
Qashqai 1.6 CVT 2014

gvmdaddy
Posts: 2245
Joined: Thu Jun 19, 2014 11:28 pm

Post by gvmdaddy »

Fortunately for me I never encounter those sort of low temperatures. Sadly for you I dont really know a viable solution, however I dont feel that removing the door handle to re-lubricate the mechanics will be of much help at those temperatures. You may needcto look at specialist lubricants/products such as are available to for use on snowmobiles and the like. In the past ive used 'normal products' in locks etc at only mildly low temps, ie. minus 5ºC and they failed to protect against freezing. Maybe some others on here dan be of more specific help.
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Atif, I am not sure if this will help but it might give you some ideas. This stuff I have used on our Micra, Note, Juke and now the QQ and it has helped but I must say we have not had it down to -20C for some time. Do not forget to lubricate the rubber seals also - Good Luck Dave ;)
Take a look at "Main QQ Discussions" / Berlin Tekna - Winter Preparation"
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Atif, too make it easier for you here is the Link :

http://qashqaiforums.co.uk/viewtopic.ph ... ion#p13065

What you could also try is the trusted WD40 Type Spray as attached you will see the vast range of use for this product - I have attached also a Safety Data Sheet. Here in Berlin it is -11°C today but dry and all our doors open - Dave :)

WD-40 Multi-Use Product & WD-40 Specialist Spray Lubricants :

http://wd40.com/

WD-40® Technical Data Sheet - WD-40 Company :

http://www.wd40company.com/files/pdf/wd ... 952473.pdf
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Atif
Posts: 71
Joined: Thu Nov 20, 2014 5:49 am

Post by Atif »

Thanks, Dave!

I appreciate your help. I managed to remove door handle and used pressurized air to remove some water and wd40 to grease moving parts.

Tomorrow will see, if that helps.

Here, in Estonia, we have -10 today and intense snow, but next week we will have -25 or so. :)
Qashqai 1.6 CVT 2014
Post Reply