Horn
I purchased some PIAA horns but not the slimline ones.
Does anyone know if they will fit ok and if so where?
J11 QQ
Also am I correct in thinking you just need to make up a pair of "Y" shaped wires with the correct spade connectors to fit them to the original female spade plugs.
Thanks
Does anyone know if they will fit ok and if so where?
J11 QQ
Also am I correct in thinking you just need to make up a pair of "Y" shaped wires with the correct spade connectors to fit them to the original female spade plugs.
Thanks
QQ 2015 1.6 Dig-T Gun Metal
Mods so far: LED interior lights, Side steps, Spare wheel, PIAA twin horns, Boot entry protector, Vinyl sill protection.
Mods so far: LED interior lights, Side steps, Spare wheel, PIAA twin horns, Boot entry protector, Vinyl sill protection.
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
QQ1234, I think the Man to ask is "Jon" (jonceebee)) he installed some PIAA Horns but which Type is unknown - Dave
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
- Gel
- Posts: 3265
- Joined: Thu May 22, 2014 12:02 pm
- Location: Thames Valley UK
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Yes, you'll need to modify spade connectors, and I fitted close to where existing pathetic OEM ones are; it's a very tight fit however.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol
-
- Posts: 382
- Joined: Sun Dec 27, 2015 3:08 pm
- Location: East Anglia
So with the Piaa slimline, do you get one or two horns as lots of the adverts just show one?
http://www.demon-tweeks.co.uk/performan ... -400-500hz
http://www.ebay.co.uk/itm/like/33140403 ... ue&ff13=80
http://www.demon-tweeks.co.uk/performan ... -400-500hz
http://www.ebay.co.uk/itm/like/33140403 ... ue&ff13=80
2015 1.6 dci Tekna, AWD.
I fitted a pair of these in less than 1 hour..
Hella 3FH 007 424-801 Horn Set.
http://www.amazon.co.uk/gp/product/B001 ... ge_o09_s00
I simply created two sets of extension wires leading from the master, removed the original horn and used the original bracket and the brackets that came with the Hella set.
Works a treat.
Hella 3FH 007 424-801 Horn Set.
http://www.amazon.co.uk/gp/product/B001 ... ge_o09_s00
I simply created two sets of extension wires leading from the master, removed the original horn and used the original bracket and the brackets that came with the Hella set.
Works a treat.
QQJ11 Tekna KAD Grey 130 1.6 2WD, Full options.
-
- Posts: 382
- Joined: Sun Dec 27, 2015 3:08 pm
- Location: East Anglia
Has anyone some photo's of their replacement horns? Just want to see how tight a fit they are for different horns/brackets.
Looks like some of them need relays as well.......................perhaps dependant on car.
Looks like some of them need relays as well.......................perhaps dependant on car.
2015 1.6 dci Tekna, AWD.
QQ1234, look at this...http://www.demon-tweeks.co.uk/oncirrus/ ... WXltMc.pdf