Page 9 of 10

Re: Project: Reversing / Disabling Stop/Start feature

PostPosted: Sun Jan 08, 2017 9:34 pm
by LucaModric
On my QQ Acenta stop/start has been disabled at the dealers garage. A mechanic disconnected the bonnet sensor and repositioned it - and stop/start was disabled. No alarm problems or any other problems. Me very happy :-)

Re: Project: Reversing / Disabling Stop/Start feature

PostPosted: Mon Jan 09, 2017 11:35 am
by Highland
Hi. This is what I did but when I tried to lock doors alarm sounded. Can you lock doors with no alarm?

Re: Project: Reversing / Disabling Stop/Start feature

PostPosted: Mon Jan 09, 2017 11:46 am
by duncho
Luca must have aftermarket alarm not integrated with car electrics and data communication (CAN-BUS). In such case, there is no, or separate hood switch. Interesting that her dealer did this modification, especially because it is illegal from Nissan perspective ;)

Re: Project: Reversing / Disabling Stop/Start feature

PostPosted: Mon Jan 09, 2017 5:08 pm
by QQ013
Or luca has just as the mainland models no alarm to start with.
Re positioning the bonnet sensor results in a open bonnet signal. Disabling the start/stop but picked up by the alarm as a opened bonnet ;)

Re: Project: Reversing / Disabling Stop/Start feature

PostPosted: Mon Jan 09, 2017 5:26 pm
by duncho
QQ013 wrote:Or luca has just as the mainland models no alarm to start with.
Re positioning the bonnet sensor results in a open bonnet signal. Disabling the start/stop but picked up by the alarm as a opened bonnet ;)

and generating DTC which is saved and visible to any Nissan dealer :)

Re: Project: Reversing / Disabling Stop/Start feature

PostPosted: Mon Jan 09, 2017 7:03 pm
by Gel
What's DTC Dan??

Re: Project: Reversing / Disabling Stop/Start feature

PostPosted: Mon Jan 09, 2017 7:42 pm
by duncho
DTC means "Diagnostic Trouble Codes"
You can find some insights here ;)
http://www.trouble-codes.com

Re: Project: Reversing / Disabling Stop/Start feature

PostPosted: Mon Jan 09, 2017 8:19 pm
by LucaModric
My QQ is for Croatian i.e. mainland market and there is no (aftermarket) alarm. I've double checked the warranty with my mechanic and the chief of the garage and they confirmed my original Nissan waranty will be valid after s/s has been disabled in such manner. I do not have any alarm issue or warning lights on.

Re: Project: Reversing / Disabling Stop/Start feature

PostPosted: Mon Jan 09, 2017 8:26 pm
by duncho
LucaModric wrote:My QQ is for Croatian i.e. mainland market and there is no (aftermarket) alarm. I've double checked the warranty with my mechanic and the chief of the garage and they confirmed my original Nissan waranty will be valid after s/s has been disabled in such manner. I do not have any alarm issue or warning lights on.


Did your dealer confirmed this to you in writing or verbally? ;)

Re: Project: Reversing / Disabling Stop/Start feature

PostPosted: Mon Jan 09, 2017 8:28 pm
by Gel
duncho wrote:DTC means "Diagnostic Trouble Codes"
You can find some insights here ;)
http://www.trouble-codes.com

Thanks :)