Page 4 of 13

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Fri Mar 11, 2016 1:42 am
by richard_crl032
Daniel, You are the best !!!

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Tue Mar 22, 2016 2:50 am
by richard_crl032
Hi Daniel,

Any plan for next production together with expected more request in UK and elsewhere ??

About 10 bros in our Whatsapp are hoping for the same as your token $ is a no-brainer to rid of this SS that had also be credited for powerloss and ebrake issues .......... and I would be OK to place say 15 units ??

Thanks and best regards,

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Tue Mar 22, 2016 8:22 am
by duncho
Hi Richard,
I am extremely busy, but will try to find a way. I will ask friend of mine to do PCBs for me, which is the most time consuming thing. Try to get definite number taking into consideration also the future interest as this will most likely be my last production. Greetings :)

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Tue Mar 22, 2016 10:31 am
by gvmdaddy
"powerloss and ebrake issues" ??

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Tue Mar 22, 2016 10:49 am
by duncho
gvmdaddy wrote:"powerloss and ebrake issues" ??
Do you mean regarding use of the module?

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Tue Mar 22, 2016 10:36 pm
by richard_crl032
Gvmdaddy,

About 5% of the 100+ owners in our whatsapp group experienced car not moving despite drive gearnbeing engaged and we termed this as powerloss phenomenon which was also noted that the ebrakes seems to be stucked and not release for 2-3 seconds. At times, this can be scary and critical safety concern but our local distributor could not offer solution until recent SW update which again proved in at least some cases that this issue is not resolved.

Not sure if UK owners had experienced this.

This is reported to be reproducible and I will posted the steps that seems to be associated with stopstart function and hence there are owners who wants itntonbe disable automatically with Duncho's module rather than manually.

Cheers

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Tue Mar 22, 2016 10:42 pm
by richard_crl032
This is the reported sequence that affected cars are how experiencing powerloss/ebrakes issue on our 1.2L dig-t petrol. Any uk owners reported the same ??

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Wed Mar 23, 2016 7:38 am
by richard_crl032
duncho wrote:Hi Richard,
I am extremely busy, but will try to find a way. I will ask friend of mine to do PCBs for me, which is the most time consuming thing. Try to get definite number taking into consideration also the future interest as this will most likely be my last production. Greetings :)
Hi Daniel,

Understand ..... 15 units from me/Singapore owner then and hope more from UK owners and perhaps even Australia etc.

Best regards,

Richard

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Sat Apr 09, 2016 7:37 am
by Bullyboy
Hi guys just to clarify I had a little blip with the start/stop yesterday. The only way to turn it off each time you start the car is manually by pressing the button ? I went through the settings and could seem to see a permanent off feature - or have i miss it ?

By the way nice project you are doing on this thread

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Sat Apr 09, 2016 1:18 pm
by Gel
You can't permanently disable via the car's settings; switching off only disables temporarily. It will reinstate the SS function next time you start engine.