anyone know the limits of brake disc thickness for mk I ?

The place to discuss everything else..
Post Reply
Tobyjug
Posts: 4
Joined: Wed Jul 20, 2016 5:21 pm

Post by Tobyjug »

HI, picking up a Mk I 08 reg tomorrow and just wanted to ensure I wasn't going to need to replace the discs a few months after purchasing, as the garage have been very helpful sorting out any little issues before picking it up... but didn't want to trust their policy on pad and disc we before deeming needing replacement...

I understand the front discs will be a higher measurement as they are vented and the rear discs smaller measurement as they are non vented, does anyone know what thickness should keep me going for a while?

pads are ok at 8 and 5.3 mm front / rear

thanks in advance :-)

it's a 1.5 dci tekna 08

Tobyjug
Posts: 4
Joined: Wed Jul 20, 2016 5:21 pm

Post by Tobyjug »

For completness, I managed to find out it's 24mm min on the front and 8mm min on the back (non vented)

so should be ok as I have 26.55 on the front and 9 on the back, not much on the back but shouldn't see too much wear there so thing all is ok.. :D
Post Reply