Hi Guys,
I did a quick & dirty mod to my cupholders with some felt backed foam I acquired from work, cost = Zero. Only had a colour choice of blue, works well for the photos but maybe a bit of colouring (Black) required if i could be bothered to spend more than 60 mins doing this. Here are the pics. BTW works a treat, don't know how robust this will be until used a fair bit.
Hope it gives you some ideas.
The Foam
Foam Side View
Cutting Foam
Improvised ruler to cut the foam to size
More Cutting
Even more cutting into fingers
Making into wedges
Adding Double sided sticky Tape
View when fitted
Cup holder Mod
Lol, 80 views and not 1 comment, was it that bad an idea?
Daewar wrote:Hi Guys,
I did a quick & dirty mod to my cupholders with some felt backed foam I acquired from work, cost = Zero. Only had a colour choice of blue, works well for the photos but maybe a bit of colouring (Black) required if i could be bothered to spend more than 60 mins doing this. Here are the pics. BTW works a treat, don't know how robust this will be until used a fair bit.
Hope it gives you some ideas.
My travel cup in the holder is a Wizard's sleeve
My son picked up his 66 plate Astra last Thursday and one of the first things he commented on was the satisfying "hiss" of air being exhaled from the cup holder when he put his cup in. Mine (I've tried 3 or 4) rattles and does my head in
My son picked up his 66 plate Astra last Thursday and one of the first things he commented on was the satisfying "hiss" of air being exhaled from the cup holder when he put his cup in. Mine (I've tried 3 or 4) rattles and does my head in
What is a wizard sleeve?rod9669 wrote:My travel cup in the holder is a Wizard's sleeve
My son picked up his 66 plate Astra last Thursday and one of the first things he commented on was the satisfying "hiss" of air being exhaled from the cup holder when he put his cup in. Mine (I've tried 3 or 4) rattles and does my head in
QQ 1.5dci Tekna 2017 Ink Blue j11 Mk2
Previously - QQ 1.5dci NTEC 2015 Black j11 Mk2
Previously - QQ 1.5dci NTEC 2015 Black j11 Mk2
Ha, ha, good onerod9669 wrote:http://www.midlifegamer.net/wp-content/ ... sleeve.jpg
Must buy one of these, very handy tool to have I would imagine.
QQ 1.5dci Tekna 2017 Ink Blue j11 Mk2
Previously - QQ 1.5dci NTEC 2015 Black j11 Mk2
Previously - QQ 1.5dci NTEC 2015 Black j11 Mk2
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Take a look at the more expensive methods of holding Cups, perhaps we have to go a little upmarket - Dave
http://www.bbc.com/news/business-37560796
http://www.bbc.com/news/business-37560796
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken